DigiTech Drop User Manual

4
MAKING CONNECTIONS/APPLYING POWER
To connect the Drop pedal to your rig:
1. Turn down the amplifier’s master volume control.
2. Make all audio connections to the Drop as shown below.
3. Connect the included Harman power supply to the POWER input connector and connect the other
end to an available AC outlet.
4. Strum your guitar and gradually increase your amplifier’s master volume control until the desired
level is achieved.
CONNECTION DIAGRAM
AMP
HARMAN PS0913DC
POWER SUPPLY
IN
IN
OUT
OTHER EFFECTS
NOTE: The Drop should be the first pedal in your effects chain. Placing any effect in front of it can
impact the pitch shifting performance.

DigiTech Drop Specifications

General

Brand	DigiTech
Model	Drop
Category	Music Pedal
Language	English