DigiTech HARDWIRE HT-6 User Manual

14
Display Modes (Single Note Mode Only)
The HT-6 Tuner has two different tuning display modes when using Single Note
tuning mode: Normal and Strobe.
Normal Mode
When Normal mode is selected, single or groups of LEDs will be lit on the row
corresponding to the string that is played, indicating tuning status. LEDs to the
left of the center BLUE LED will be lit if the note is flat and the note needs to
be tuned up. LEDs to the right of the center BLUE LED will be lit if the note is
sharp and the note needs to be tuned down. When only the center BLUE LED
is lit, the note is in tune.
Strobe Mode
When Strobe mode is selected, the string’s tuning LEDs will cycle in motion in
the direction of the note’s current pitch. If the note is flat, the LEDs will be in
motion to the left meaning the note needs to be tuned up. If the note is sharp,

DigiTech HARDWIRE HT-6 Specifications

General

Brand	DigiTech
Model	HARDWIRE HT-6
Category	Tuner
Language	English