DigiTech QM4000 User Manual

9
APPLE CARPLAY
ANDROID AUTO
Wireless connection
First turn on the bluetooth and wifi functions of the mobile phone, and then connect
the bluetooth. Then it will automatically enter the CarPlay interface. (Note: The signal is
transmitted through wifi at this time, so even if the Bluetooth function is turned off, it will be
transmitted normally. When the wifi function is turned off, CarPlay will be disconnected.)
Wireless connection
First turn on the Bluetooth and wifi functions of the mobile phone, and then connect the
Bluetooth. Then it will automatically enter the Android Auto interface. (Note: The signal is
transmitted through wifi at this time, so even if the Bluetooth function is turned off, it will be
transmitted normally. When the wifi function is turned off, Android Auto will be disconnected.)
This feature is not supported in all countries, and “Google Play” services need to be available
locally.
Need to download and install “Android Auto” software in “Google Play”. A mobile phone with
Android 6.0 or higher must be used. Must use a valid data cable connection.
Touch input available
Touch input available
NOTE: Android Auto services require
a data connection from your mobile
device, please contact your provider
for data rates and usage.
NOTE: Apple Carplay services
require a data connection from your
mobile device, please contact your
provider for data rates and usage.

DigiTech QM4000 Specifications

General

Display Size	7” (1024 x 600 resolution)
Backlight	400cd/m2
Viewing Angles	Up/Down 85, Left/Right 85
Input Method	Touch
Functions	Carplay/Android Auto Reversing Camera (Not included)
Connections	Bluetooth USB-A Micro SD Card AV - In Aux - Out
Radio	FM Transmission
Speaker Output	3W