Store the Preset
The last step that we need to do is to store our changes to a User Preset. If we changed Presets or turned the RP2000
off without storing these settings, it would forget what we had done and revert back to the original Preset. Press the
Store button once.The first letter in the Display begins to flash which is asking us to rename the Preset. Since this is an
example Preset, let’s name the Preset exampl. Rotate the Data Wheel until the flashing character in the Display is an
E. Press the Rhythm button once and the second character begins to flash. Rotate the Data Wheel again until the flash-
ing character is an X. Press the Rhythm button again to Select the third character and change it to an A. by rotating the
Data Wheel. Continue using the rhythm button to select the characters and the Data Wheel to change the characters.
Once exampl is in the Display, press the Store button again. Now the numbers in the red Display are flashing which is
asking you where you want to store this new Preset. Rotate the Data Wheel to select 64 as the destination. Press the
Store button one more time to execute the Store function.
Congratulations! You have successfully created a Preset.
Page 27
Section Four - Tutorial
RP2000 User’s Guide
To Next Page
Loading...
Need help?
General
