17
To edit and create a custom preset:
1. Use the Footswitches to select the preset you wish to edit. If you are trying to find some-
thing different from the existing presets, begin by using the Tone Library, Effects Library, and
Effects Level knobs to get close to a sound you want.
2. Once you have a sound close to what you are after, begin editing the effect parameters by press-
ing the Edit Up/Down buttons and selecting the Effect row you want to edit.
3. To turn on or off an Effect row, press Knob 1 and then use Knobs 2-4 to modify the effects
parameter settings.
Anytime a stored value within a preset is changed, the Store button LED lights up. This indicates
that you need to store the changes. Changing presets, or turning the power off before storing any
changes erases any edits made and the RP150 will revert to the stored values for the preset.
To Next Page
Loading...
Need help?
General
