tuner mode by pressing either Footswitch. The tuning reference is retained when the unit is
turned off.
Bypass
The RP55 presets can be bypassed for a clean, unprocessed guitar tone. To bypass the
RP55, press both footswitches simultaneously. The display reads By indicating the preset is
bypassed. Press either footswitch to exit Bypass and return the last selected preset.
Creating your own signature sound with the RP55 is easy and intuitive. The RP55 lets you create
your own presets, or fine tune existing Presets to suit your needs. When creating or editing a
sound, you must start with a User or Factory Preset. It is not possible to start with an empty
preset. You can save your preset to any User Preset location while storing the preset (see
Storing a Preset pg 12).
To edit or create a Preset:
1. Press the to select a preset
2. Press the EDIT buttons in conjunction with the Effect LEDs to choose the effect you want
to edit.
3. Press the Buttons to change the parameter values.
To Next Page
Loading...
Need help?
General
