34
Drum Machine
The RP90 features a built-in drum machine, which is enabled by pressing the Drums button.
Select patterns, tempo, and level with the Edit Up/Down buttons. Change their values with the
Value Up/Down buttons. The drum machine has the following parameters
Drum Patterns
Drum Tempo (equivalent of 40 – 240BPM)
Drum Level
Drum machine settings are globally set and not individually stored with each of the RP90’s user
presets.
Factory Reset
This function resets the RP90 to its original factory settings. This procedure erases all custom
User presets.
ATTENTION: Performing this function will erase all user-programmed data. All such
data will be lost forever! Be sure you want to erase the memory and return the RP90
to its factory default state before continuing with this procedure.
The procedure for performing a Factory Reset is as follows:
1. Press and hold the Store button while powering up the RP90.
2. When the display prompts you with , release the Store button.
3. Press and hold the Store button for 3 seconds until appears in the display and release. The
Factory Reset procedure takes approximately 10 seconds.
4. Once the factory reset has finished you will need to calibrate the Expression Pedal. Follow
steps 2-4 on the next page to complete calibration.
To Next Page
Loading...
Need help?
General
