Left (Mono) Input 1.
If you have separate left and right inputs, connect your left input to this jack. If
you’re using a mono input/stereo output configuration, connect to this input if
you want the delays to “ping-pong” between the right and left outputs (for delay
types with multiple taps).
Right Input 2.
If you have separate left and right inputs, connect your right input to this jack. If
you’re using a mono input/stereo output configuration, connect it to this input if
you want all delays (other than dual-delays) to be panned center.
Main Outputs3.
Connect the outputs to your amp or mixer. Use only the left output for mono, or
connect both for full stereo sound.
Footswitch Input4.
Connect an optional 3-button FS3X footswitch to this input to step through the
memory locations. On the FS3X, the right button moves you up one memory
location, and the center button moves you down one location. When Looper
8
Guided Tour - Rear Panel
To Next Page
Loading...
Need help?
General
