DigiTech TONE DRIVER User Manual

Warning
F
or your protection, please read the following:
Important Safety Instructions
1.Read these instructions.
2.Keep these instructions.
3.Heed all warnings.
4.Do not use this apparatus near water.
5.Clean only with dry cloth.
6.Do not block any ventilation openings.Install in
accordance with the manufacturer’s instructions.
7.Do not install near any heat sources such as radiators,
heat registers,stoves,or other apparatus (including
amplifiers) that produce heat.
8.Protect the power cord from being walked on or
pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
9.Unplug this apparatus during lightning storms or when
unused for long periods of time.
10.No user serviceable parts inside. Refer all servicing to
qualified service personnel. Servicing is required when
the apparatus has been damaged in any way,such as
power-supply cord or plug is damaged,liquid has been
spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture,does
not operate normally, or has been dropped.
11.WARNING:To reduce the risk of fire or electric
shock,do not expose this apparatus to rain or
moisture.
12.Refer to labels on the unit,including bottom cover,for
other markings and pertinent information.
DECLARATION OF CONFORMITY
Manufacturer’s Name: DigiTech
Manufacturer’s Address: 8760 S. Sandy Parkway
Sandy, Utah 84070,USA
declares that the product:
Product name: Tone Driver
Product option: all (requires Class II power
adapter that conforms to the
requirements of EN60065,
EN60742,or equivalent.)
conforms to the following Product Specifications:
Safety: IEC 60065 (1998)
EMC: EN 55013 (1990)
EN 55020 (1991)
Supplementary Information:
The product herewith complies with the requirements of the Low
Voltage Directive 72/23/EEC and the EMC Directive 89/336/EEC as
amended by Directive 93/68/EEC.
Vice-President of Engineering
8760 S.Sandy Parkway
Sandy, Utah 84070,USA
Date:February 22,2002
European Contact: Your local DigiTech Sales and
Service Office or
Harman Music Group
8760 South Sandy Parkway
Sandy, Utah
84070 USA
Ph:(801) 566-8800
Fax:(801) 568-7583

DigiTech TONE DRIVER Specifications

Power

power_supply	9V Alkaline Dry Battery
power_consumption	4.8 Watts
optional_power_supply	PS200R - 100 (100V ~ 50/60Hz), PS200R - 120 (120V ~ 60Hz), PS200R - 230 (230V ~ 60Hz), PS200R - 240 (240V ~ 60Hz)

Impedance

input_impedance	280 kOhms
output_impedance	100 Ohms

Weight and Dimensions

weight	1.38 lbs
dimensions	4 15/16”(L) x 3 1/8”(W) x 2 1/8”(H)