Ditch Witch 1820 User Manual

1820 - DRILLING ATTACHMENT 45
PREPARE JOBSITE AND EQUIPMENT
1820 - DRILLING ATTACHMENT 45
PREPARE JOBSITE AND EQUIPMENT
PREPARE JOBSITE AND EQUIPMENT
Approach Trench (1)
1. Mark path where you intend to drill.
2. Dig an approach trench (1) along the intended drill path.
Target Trench (2)
1. Select a completion point for the drilling project.
2. Dig a target trench (2) across the anticipated completion
point.
IMPORTANT: The approach trench should be at least:
• deep enough for pipe to lay flat and enter soil
at correct angle
•20’ (6 m) long
• 4" (100 mm) wide
IMPORTANT: The actual length of the target trench
depends on soil conditions and length of pipe sections.
Make it deep enough for drill bit to enter slightly above
the trench floor.
om0529h eps
1
2
PREPARE JOBSITE AND EQUIPMENT
Approach Trench (1)
1. Mark path where you intend to drill.
2. Dig an approach trench (1) along the intended drill path.
Target Trench (2)
1. Select a completion point for the drilling project.
2. Dig a target trench (2) across the anticipated completion
point.
IMPORTANT: The approach trench should be at least:
• deep enough for pipe to lay flat and enter soil
at correct angle
• 20’ (6 m) long
• 4" (100 mm) wide
IMPORTANT: The actual length of the target trench
depends on soil conditions and length of pipe sections.
Make it deep enough for drill bit to enter slightly above
the trench floor.
om0529h eps
1
2

Ditch Witch 1820 Specifications

General

Brand	Ditch Witch
Model	1820
Category	Tractor
Language	English