Hobs and Combinations Cleaning the device
29
➤ Replace the gas cylinder according to the instructions from the gas fitting
manufacturer.
8Cleaning the device
!
A
➤ Clean the device as shown (fig. k, page 17).
9 Maintaining the device
9.1 Annual safety check
➤ For safety reasons, have the device checked by an expert every year for proper
function. Any defects must be repaired.
9.2 Replacing the nozzles
!
➤ Replace the nozzles as shown:
– Disassembly: fig. l, page 18
– Assembly: fig. m, page 19
CAUTION! Hot surface!
The surface may still be hot. Keep children away.
Let the device cool down to ambient temperature before you touch it
with bare hands.
NOTICE!
Do not use any sharp or hard objects for cleaning since they may
damage the device.
Only use standard commercial cleaning agents.
Do not use a steam cleaner to clean the device.
WARNING! Beware of injury!
The nozzles must only be replaced by qualified specialists. Incorrect
assembly and installation can result in serious hazards due to the escape
of gas.
DometicPI80xx-PI90x3-MO71x3-MO9x22_IOM_4445103103_EMEA16_xxxx-xx-xx.book Seite 29 Montag, 18. Januar 2021 10:56 22
To Next Page
Loading...
