CVH1525(G), CVC1700G Troubleshooting
25
9.2 Annual safety check
➤ For safety reasons, have the device checked by a qualified person every year for
proper function. Any defects must be repaired.
9.3 Replacing the nozzles
➤ Let a qualified person replace the nozzles as shown (fig. d, page 11 – fig. e,
page 12).
10 Troubleshooting
!
➤ Contact an authorized service agent if you observe one of the following abnor-
mal conditions:
– Excessively yellow or sooting flame type
– Flame lifting off the burner ports
– Flame lighting back into the burner (normally associated with a popping
sound)
– Objectionable odor of the flames combustion products
If a malfunction of the cooktop occurs that is not described above, first refer to the
following table for possible causes and remedies before contacting an authorized
service agent.
The assembly and installation of the gas connection must be performed
by a qualified person who has demonstrated skill and knowledge related
to the construction, installation and operation of gas appliances and has
received safety training to identify and avoid the hazards involved.
The assembly and installation of the gas connection must be performed
by a qualified person who has demonstrated skill and knowledge related
to the construction, installation and operation of gas appliances and has
received safety training to identify and avoid the hazards involved.
WARNING! Risk of injury
Servicing of the cooktop must only be done by a qualified person and
the cooktop must not be modified. Power must be disconnected before
any servicing or maintenance is conducted.
To Next Page
Loading...
Need help?
General
