Installing and connecting the DC kit DC-Kit2
14
7 Installing and connecting the DC kit
A
A
Note the following safety instructions during installation:
A
NOTICE!
The DC kit may only be installed by a qualified workshop.
The following information is intended for specialists who are familiar with
the guidelines and safety precautions to be applied.
NOTICE!
Observe the information in the installation and operating manuals when
installing the components supplied
• PP2002 inverter
• Inverter adapter
• RC1 remote control (for CA2500/B2200/B1600 Plus/FJ1100/
FJ1700/ FJ2200/FL1600/FL2200)
• RC2 remote control (for B1600)
• MCR9 remote control
• ECL-102 charging current distributor
and for your Dometic roof air conditioner
• CA2500
• B1600, B1600 Plus, B2200
• FJ1100, FJ1700, FJ2200
• FL1600, FL2200
NOTICE!
• Note the location of wiring harnesses, wiring and other components
within the installation area.
• Install the DC kit using the following instructions. Improper
installation of the DC kit can put the safety of the user at risk and lead
to irreparable damage to the DC kit or other devices.
• Disconnect all power supply lines to the individual components and
the roof air conditioner.
DC-Kit2--IO-16s.book Seite 14 Dienstag, 21. März 2017 2:15 14
To Next Page
Loading...
Need help?
General
