FreshWell3000 Operating the under-bench air conditioner
21
8.6 Selecting the blower setting manually
I
The blower controls the strength of the air supply.
In the “Cooling” ( ) and “Circulating air” ( ) modes, the blower levels can be
selected manually. In the other air conditioning modes, the under-bench air
conditioner controls the blower level automatically.
➤ Use the button to select the desired blower level.
✓ The under-bench air conditioner confirms the receipt of the values with a high
note.
✓ The new blower level has been set.
8.7 Setting the temperature
I
Cooling Mode
In the “Cooling” ( ), and “Dehumidifying” ( ) modes, you can specify a
temperature between 16 °C and 31 °C via the remote control.
➤ Use the + or – button to select the desired temperature.
✓ The under-bench air conditioner confirms the receipt of the values with a high
note.
✓ The temperature is set on the under-bench air conditioner.
NOTE
The under-bench air conditioner must be switched on.
Display message Explanation
Low blower level
Medium blower level
High blower level
not available in the “Cooling” ( ) mode
Automatic mode, only available in the “Cooling” ( ), “Heating”
( ) and “Dehumidifying” ( ) modes.
NOTE
The under-bench air conditioner must be switched on.
FreshWell3000-O-16s.book Seite 21 Freitag, 18. August 2017 2:14 14
To Next Page
Loading...
Need help?
General
