10
• Incorrect maintenance or use of spare parts
other than original spare parts provided by the
manufacturer
• Alterations to the product without express per-
mission from the manufacturer
• Use for purposes other than those described in
this manual
Dometic reserves the right to change product
appearance and product specifications.
Operation
Scope of delivery: fig. 1
Proceed as shown:
• Switching on: fig. 2
• Setting the temperature: fig. 3
• Setting the silent mode (standby) (only for
C40S1, C40S2, C40P1, C40P2, C40G1,
C40G2 with compressor cooling): fig. 4
• Switching off: fig. 5
Warranty
If the product does not work as it should, please
contact your retailer or the manufacturer's branch
in your country (see dometic.com/dealer). The
warranty applicable to your product is 2 year(s).
For repair and warranty processing, please include
the following documents when you send in the
device:
• A copy of the receipt with purchasing date
• A reason for the claim or description of the fault
Australia only
Our goods come with guarantees that cannot be
excluded under the Australian Consumer Law. You
are entitled to a replacement or refund for a major
failure and for compensation for any other reasona-
bly foreseeable loss or damage. You are also enti-
tled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the fail-
ure does not amount to a major failure.
New Zealand only
This warranty policy is subject to the conditions
and guarantees which are mandatory as implied by
the Consumer Guarantees Act 1993(NZ).
Disposal
➤Place the packaging material in the appropriate
recycling waste bins wherever possible.
M
If you wish to finally dispose of the
product, ask your local recycling centre
or specialist dealer for details about how
to do this in accordance with the appli-
cable disposal regulations.
DometicHiPro30-40_SOM_4445103229_APAC(en).book Seite 10 Freitag, 8. Januar 2021 1:37 13
To Next Page
Loading...
Need help?
General
