Health hazard
To avoid contamination of food, please respect the following instructions:
Please check if the cooling capacity of the device is suitable for storing the food or medicine you wish to cool.
Food may only be stored in its original packaging or in suitable containers.
Opening the cooling device for long periods can cause significant increase of the temperature in the compartments of the device.
Clean regularly surfaces that can come in contact with food and accessible drainage systems.
If the device is left empty for long periods:
– Switch off the device.
– Defrost the device.
– Clean and dry the device.
– Leave the lid open to prevent mould developing within the device
NOTICE! Damage hazard
Check that the voltage specification on the type plate corresponds to that of the energy supply.
Only connect the cooling device to a DC power supply in the vehicle with the DC cable.
Never pull the plug out of the socket by the cable.
Disconnect the cooling device and other power consuming devices from the battery before connecting a quick charging device.
Disconnect the cooling device or switch it off when you turn off the engine. Otherwise you may discharge the battery.
The cooling device is not suitable for transporting caustic materials or materials containing solvents.
Do not use electrical devices inside the cooling device unless they are recommended by the manufacturer for the purpose.
Do not place the cooling device near naked flames or other heat
sources (heaters, direct sunlight, gas ovens etc.).
Risk of overheating!
Ensure at all times that there is a minimum of 50 mm ventilation on all
four sides of the cooling device. Keep the ventilation area free of any
objects that could restrict the air flow to the cooling components.
Do not place the cooling device in closed compartments or areas with none or minimal air flow.
Ensure that the ventilation openings are not covered.
Do not fill the inner container with ice or fluids.
Never immerse the cooling device in water.
Protect the cooling device and cables against heat and moisture.
The device shall not to be exposed to rain.
Scope of delivery
Quantity Description
1 Thermoelectric cooling box
1 Thermoelectric cooling box
Intended use
The cooling box is suitable for cooling food. The cooling box is designed to be operated from a 12 V or a 24 V DC power supply.
The cooling box is intended to be used in household and similar applications such as
staff kitchen areas in shops, offices and other working environments
farm houses
clients in hotels, motels and other residential type environments
bed and breakfast type environments
catering and similar non-retail applications
The cooling box is also suitable for:
use on vehicles
camping use
The cooling box is not suitable for:
storage of corrosive, caustic or solvent-containing substances
freezing of food
This cooling box is not intended to be used as a built-in appliance.
This product is only suitable for the intended purpose and application in accordance with these instructions.
This manual provides information that is necessary for proper installation and/or operation of the product. Poor installation and/or improper operating or maintenance will result in
unsatisfactory performance and a possible failure.
The manufacturer accepts no liability for any injury or damage to the product resulting from:
Incorrect assembly or connection, including excess voltage
Incorrect maintenance or use of spare parts other than original spare parts provided by the manufacturer
Alterations to the product without express permission from the manufacturer
Use for purposes other than those described in this manual
Dometic reserves the right to change product appearance and product specifications.
Technical description
The cooling device can cool products to a maximum of 18 °C under the ambient temperature.
Its cooling system is a non-wearing Peltier cooling, the heat is discharged by a fan.
Control elements
To Next Page
Loading...
Need help?
General
