To Next Page

To Previous Page

Sediment Cup Cleaning

1. Move the fuel valve to the OFF position, and then remove the fuel sediment cup and O-ring.

2. Wash the sediment cup and O-ring in nonflammable solvent and dry them thoroughly.

3. Place the O-ring in the fuel valve and install the sediment cup. Tighten the sediment cup securely.

4. Move the fuel valve to the ON position, and check for leaks. Replace the O-ring if there is any leakage.

Gasoline is highly fl

ammable and explosive. You can be burned or seriously injured when handling fuel.

•

Stop the engine and keep heat, sparks, and flame away.

•

Handle fuel only outdoors.

•

Wipe up spills immediately.

Questions and Answers:

Need help?

Do you have a question about the DR W210FS/P and is the answer not in the manual?

DR W210FS/P Specifications

General