To Next Page

To Previous Page

ADDING OIL FOR THE FIRST TIME

Oil Capacity

W210FS/P: 20.3 fl oz (0.6L)

W300FS(E)/P: 32.1 fl oz (0.95L)

W420FS(E)/P: 37.2 fl oz (1.1L)

SAE 10W-30 is recommended for general use. Other viscosities shown in the chart may be used when the average temperature in

your area is within the indicated range.

1. Remove the dipstick and add oil until it reaches the lower threads in the oil filler hole.

2. Reinsert the dipstick into the oil filling hole without screwing it in. Pull dipstick out and check oil level.

3. If the oil level is too low, add oil until it reaches the oil upper level.

4. Reinstall the dipstick when finished and screw all the way in.

Use 4

-stroke engine oil, API service classification

class or equivalent. Check the API service label on the oil containe

r to be sure

it includes

the letters SJ class or equivalent.

Oil Dipstick

Drain Plug

Oil Upp

er Level

Oil Lower Level

Environment Temperature

SAE Viscosity Grades

Run

ning the engine with insufficient engine oil may damage the engine severely and would not be covered under warranty.

Questions and Answers:

Need help?

Do you have a question about the DR W210FS/P and is the answer not in the manual?

DR W210FS/P Specifications

General