DR W210FS/P User Manual

28 DR
®
GASOLINE ENGINE
A manufacturer of an aftermarket part assumes the responsibility that the part will not adversely affect emission performance. The
manufacturer or rebuilder of the part must certify that use of the part will not result in a failure of the engine to comply with
emission regulations.
Maintenance
Follow the maintenance schedule. Remember that this schedule is based on the assumption that your machine will be used for its
designed purpose. Sustained high-load or high-temperature operation, or use in unusually wet or dusty conditions, will require
more frequent service.
Engine Tune-up
ITEM SPECIFICATION
Spark plug gap
0.028-0.031 in
(0.70 mm -0.80 mm)
Valve clearance
IN: 0. 10mm-0.15 mm (cold) EX:
0.10mm-0.15 mm (cold)
Other specifications No other adjustments needed
Quick Reference Information
Engine Oil
Type SAE 10W-30, API SE or SF, for general use
Capacity
W210FS/P: 20.3 fl oz (0.6L)
W300FS(E)/P: 32.1 fl oz (0.95L)
W420FS(E)/P: 37.2 fl oz (1.1L)
Spark Plug
Type F7RTC or other equivalents.
Gap
0.028－0.031 in (0.70 mm－0.80 mm)
Carburetor Idle speed
2,000 rpm±200 rpm
Maintenance
Each use Check engine oil.
First 20 hours Change engine oil.
Subsequent Refer to the maintenance

DR W210FS/P Specifications

General

Brand	DR
Model	W210FS/P
Category	Portable Generator
Language	English