Dreame Bot Z10Pro User Manual

15
Cleaning Mode
Dreame Bot Z10 Pro has four cleaning modes: Quiet, Standard, Strong and Turbo. The
default mode is Standard. You can specify the cleaning mode in the Mi Home/Xiaomi app.
Pause/Sleep Mode
Pause: Press any button briefly to pause the robot during cleaning.
Sleep Mode: The robot will automatically enter Sleep Mode after 10 minutes of inactivity,
then the power indicator and charging indicator will go off. To wake up the robot, press
any button.
Note:
 The robot will turn off automatically if left in Sleep Mode for more than 12 hours.
 When the robot is paused, placing it onto the base will end the current cleaning
task.
Spot Clean Mode
When the robot is paused or in Standby Mode, press and hold the button for 3 seconds
to start Spot Clean Mode. In this mode, it will clean a square-shaped area of 1.5x1.5x
meters directly around the robot. When the spot cleaning is done, the robot will
automatically return to its original location and power off.
Note: Activating Spot Clean Mode will end the current cleaning task of the robot.
Additional App Functions
You can enable more functions via Mi Home/Xiaomi Home app such as selected room
cleaning, zone cleaning, forbidden are/virtual no-go zones, etc.
Note:
 Follow the instructions on the app interface to use more functions.
 The version of the app might have been updated, please follow the instructions
based in the current app version.

Dreame Bot Z10Pro Specifications

General

Brand	Dreame
Model	Bot Z10Pro
Category	Vacuum Cleaner
Language	English