EasyManuals Logo
Home>Dreve>Laboratory Equipment>Polymax 5

Dreve Polymax 5 User Manual

Default Icon
Go to English
160 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #45 background imageLoading...
Page #45 background image
45
english deutschfrançaisespañolitaliano
nederlands
13. Care and maintenance
Disconnect the unit from mains sup-
ply before care and maintenance! The
water inside the pressure pot has to
be changed regularly (at least once a
week), because the lime particulates
harm the surface of the pressure pot.
Polymax 1, 3 and 5
For the cleaning of the pressure pot
open the drain tap (23) at the rear of
the unit and let the water flow out.
Remove dirt thoroughly.
Attention: Do not use scouring
agents, steel-wool or sponge
scourers.
Clean the interior pot with fresh water,
a neutral washing-up liquid and a soft
scarf or sponge. Afterwards let the
water run out. Close the drain tap (23)
and fill with fresh water. The O-ring
should be greased regularly with sili-
cone grease (35 g tube, Item-no.:
D-3350).

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dreve Polymax 5 and is the answer not in the manual?

Dreve Polymax 5 Specifications

General IconGeneral
BrandDreve
ModelPolymax 5
CategoryLaboratory Equipment
LanguageEnglish

Related product manuals