Bobcat X Owner’s Manual www.drivemedical.com
Prior to using your scooter, you may want to make adjustments for optimum comfort.
Make all adjustments with the scooter off, and unoccupied. If included with your
model scooter use the tool-kit to make certain adjustments.
WARNING – Some components of your scooter are heavy, and you may
need assistance to lift or carry. Please refer to Section XII SPECIFICATIONS
for component weights.
WARNING – Do not make any adjustments while an occupant is seated in
the scooter.
Tiller Angle Adjustment:
The angle of the tiller can be adjusted to
multiple positions to suit each user.
Loosen the knob on the right side of the
tiller, reposition the tiller as necessary,
and tighten the knob to secure the tiller
in place.
Seat Height Adjustment:
Remove the seat from your scooter, then
remove the nut and bolt holding the seat
post in place. Adjust the seat post to the
desired height, and reinstall the nut and
bolt removed. Be sure the nut and bolt
are tightened securely to reduce
vibrations, and improve stability.
To Next Page
Loading...
Need help?
General
