Chapter 1.0 Quick Reference
1.0 Quick Reference
The PowerSeries Neo Alarm System uses shortcut keys to access options or features on all models
of keypads. When using an LCD keypad, the PowerSeries Neo Alarm System additionally uses a
menu based navigation system. The scroll keys can be used to [Scroll] through the list of options con-
tained within the current menu. For more information on keypads see: 2.0 “Understanding your
Keypad”. Lookup detailed information on any of the listed actions using the accompanying Section
number.
For detailed information about the PowerSeries Neo Alarm System, refer to the full online manual,
which can be accessed from the DSC.com Web site.
Note: Some features must be enabled by installer.
Note: Bypass Groups are not permitted in UL listed installations.
Note: [*] - If configured by installer.
Status
Lights
Function Keys
Function
Keys
Status
Lights
Emergency
Keys
Emergency
Keys
Ready - Indicates system normal. Must
be on to set system. All zones must be
secured or bypassed and the system unset
for this light to activate.
Stay
Set
Fire Alarm
Set- Indicates system is set. If the Ready
light and the Set light are both on, an
Exit Delay is in progress.
Away
Set
Medical
Alarm
Trouble - On indicates a system mal-
function or tamper. Flashing indicates
that the keypad has a low battery con-
dition. Follow the instructions displayed
or enter [*][2] to view trouble. Cor-
recting the trouble turns off the indic-
ator.
Chime Panic Alarm
AC Power - Indicates AC Power is
present. The AC Power light will turn
off when AC is absent.
Reset
Sensors
Quick
Exit
Action Press
Setting and Unsetting
Away Set
for 2 seconds + [Access Code*]
Stay Set
for 2 seconds + [Access Code*]
Night Set When set in stay mode [*][1] + [Access Code*]
No-Entry Setting [*][9] + [Access Code*]
Quick Set/Quick Exit [*][0]
Abort Setting Sequence [Access Code]
Bypassing - All bypass commands begin with [*][1] + [Access Code*]
- 3 -
To Next Page
Loading...
Need help?
General
