Ducati SPORT 1000 S User Manual

48
E
Lubricating cables and joints
The condition of the outer throttle cables should be checked
at regular intervals. The outer cables should show no signs
of kinking or cracking. Operate the control to check that
the inner cable slides smoothly: if you feel any friction or
catching, have the cable replaced by a Ducati Dealer or
Authorized Service Centre.
To prevent problems, periodically lubricate the ends of each
control cable with SHELL Advance Grease or Retinax LX2.
To prevent problems, periodically open the twistgrip
housing by unscrewing the two screws (1, fig. 38) and
lubricate the ends of each control cable and the races
with SHELL Advance Grease or Retinax LX2.
Warning
Close the twistgrip housing carefully, inserting the
cable in the race.
Refit the housing and tighten the screws (2) to 6 Nm.
To ensure smooth operation of the sidestand pivot,
remove any dirt and apply SHELL Alvania R3 to all
points subject to friction (fig. 39).
1
fig. 38
fig. 39

Ducati SPORT 1000 S Specifications

General

Brand	Ducati
Model	SPORT 1000 S
Category	Motorcycle
Language	English