MC • Edition 2023.04 • No. 298 073 Rev. 0
6 … 16
7 … 16
4.2 Intended use
The device is considered to be used as
intended if the following instructions are
followed:
• Use in heating systems and industrial
thermal process systems.
• Use only in accordance with the oper-
ating conditions specied on the rating
plate.
• Use only with the ame monitoring
equipment specied in the approval.
• Use only in good order and condition.
• Malfunctions must be rectied immedi-
ately by authorised specialist sta and
resolved prior to any further use.
• Use only when following the instruc-
tions in this user manual and the
national regulations.
4.3 Risks in case of misuse
• The equipment is reliable in operation
when used normally.
• Personal or consequential material
damage, nancial damage or environ-
mental damage is possible in the event
of non-observance of the instructions.
• Misuse or misapplication pose a risk
to the life and limb of the operator, the
device and other material assets.
5. MPA 41xx
Microprocessor-controlled automatic burn-
er control system for continuous operation
of gas burners when using monitoring with
ionisation ame monitors or for intermittent
operation when using UV ame monitoring.
5.1 Approvals
EC type-examination certicate according to:
• EC Gas Appliances Regulation
• EC Pressure Equipment Directive
Suitable for applications up to SIL 3.
Meets the requirements of IEC 61508
5.2 Versions
The conformity / user manual relates to the following
MPA 41xx versions:
Version Operating voltage Material number
MPA 4112 V2.0 115 VAC 294815
MPA 4112 V2.0 230 VAC 294812
MPA 4114 V2.0 115 VAC 294822
MPA 4114 V2.0 230 VAC 294819
MPA 4122 V2.0 115 VAC 297009
MPA 4122 V2.0 230 VAC 297000
AM 41 V2.0 (Display) internal 297004
These MPA41xx versions are already parameterised
and can be used immediately.
Changes to program procedures and functions may be
made by qualied users.
A password is required to change the parameter set-
tings.
All settings can be found in the MPA 41xx product man-
ual:
www.dungs.com / .....