~53~
LL and LR corners are nail head: it means that the left spine of the book should be lift up to make the left
side of the spine rounder. So you can increase adjustment on both NON-OP Plate1 and OP Plate 1，and
making book to see LL and LR corners are ok or not.
LL corner is nail head: it means that the LL corner should be lift up to make the LL corner rounder, So you
can increase adjustment on NON-OP Plate 1，, and then making book to see LL corner is ok or not.
LR corner is nail head: it means that the LR corner should be lift up to make the LR corner rounder, So you
can increase adjustment on OP Plate 1
， making book to see LR corner is ok or not.
RL and RR corners are nail head: it means that the right spine of the book should be lift up to make the
right side of the spine rounder. So you can increase adjustment on both NON-OP Plate 3
and OP Plate 3，,
and then making book to see RL and RR corners are ok or not.
RL corner is nail head: it means that the RL corner should be lift up to make the RL corner rounder, So you
can increase adjustment on NON-OP Plate 3， and then making book to see RL corner is ok or not.
RR corner is nail head: it means that the RR corner should be lift up to make the RR corner rounder, So
you can increase adjustment on OP Plate 3， and then making book to see RR corner is ok or not.
All above are nail head situation, if round spine or corner happened, please refer to following point:
To Next Page
Loading...
Need help?
General
