Do not use solvent inside or near the unit (e.g. when cleaning the unit). Suc
damage the rubber rollers and resin inside the unit, resulting in malfunctions.
Make sure that the combined power consumption of the appliances to be connected does not
exceed the capacity rating of the power outlets or plug receptacles. Exceeding the capacity rating
could cause the power outlets, plug receptacles, or power extension cords to overheat and catch
a fire.
Remove any dust that accumulates on the power plug prongs and the surface of the plug from
which the prongs extend. Accumulated dust could result in a fire.
If any foreign object such as metal or liquid should enter this unit, immediately turn the unit off
at the power switch and disconnect the power plug from the power outlet. Failure to do so could
result in a fire or an electrical shock. Contact your dealer immediately.
Do not damage the power cord or power plug. (Do not scratch, alter, bend, twist, pull or place
heavy objects on the power cord or power plug.) This could result in damage, a fire or an
electrical shock.
Always grip the plug when disco
nnecting the power plug from the power outlet. Forcibly pulling
on the power cord could cause damage, resulting in a fire or an electrical shock.
Do not handle the power plug with wet hands. This could result in an electrical shock.
Before cleaning this unit, turn the unit off at the power switch and disconnect the power plug
from the power outlet. Accidental operation of the unit during cleaning could result in injury.
Do not touch the power switch with wet hands. Otherwise elect
Do not use flammable sprays inside or near the unit (e.g. when cleaning the unit). Such
flammable gas may ignite and cause a fire or combustion.
Keep away long hair, ties, jewelry and loose clothing. This could result in
Do not put fingers inside during operation. This could result in injury.
Always disconnect the power plug from the power outlet when the unit is not to be used for an
extended period. Failure to do so could result in a fire due to leakage current if the insulation
should deteriorate.
Install this unit on a level, stable stand or floor, with sufficient space around it. Failure to do so
could result in the unit overturning and causing injury.