EasyManuals Logo
Home>dynabook>Laptop>TECRA A40-J Series

dynabook TECRA A40-J Series User Manual

dynabook TECRA A40-J Series
165 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #66 background imageLoading...
Page #66 background image
Additional memory module
This section is only applicable for models equipped with the memory
module cover.
You can install additional memory into the computer in order to increase
the amount of system memory that is available. This section describes how
to install and remove optional memory modules.
You should place a mat beneath the computer in order to prevent the
computer's lid from scratches or damages when you are installing/
replacing the memory module. In this instance, you should avoid mats
that are made of materials that hold or generate static electricity.
When installing or removing a memory module, you must ensure that
you do not touch any other internal areas of the computer.
Use only memory modules approved by Dynabook.
Do not try to install or remove a memory module under the following
conditions.
a. The computer is turned on.
b. The computer was shut down in either Sleep or Hibernation Mode.
c. The wireless communication function is on.
d. Power Off and Charge function is enabled.
Be careful not to let screws or other foreign matter fall into the
computer. It might cause malfunction or electric shock.
Additional memory module is a precision electronic component that
might be fatally damaged by static electricity. Since the human body
can carry static electricity, it is important that you discharge yourself
before touching or installing any additional memory modules. To
discharge your body’s static electricity, simply touch any metal close to
you with bare hands.
Installing a memory module
To install a memory module, do the following:
1.
Click Start -> (Power) and then click Shut down while holding
down the SHIFT key. Ensure that the Power indicator is off.
2. Remove the AC adaptor, all cables, and peripherals connected to the
computer.
3. Close the display panel and turn the computer upside down.
4. Loosen the screw securing the memory module cover in place. Note
that the screw is attached to the cover in order to prevent it from being
lost.
User's Manual
4-16

Table of Contents

Other manuals for dynabook TECRA A40-J Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the dynabook TECRA A40-J Series and is the answer not in the manual?

dynabook TECRA A40-J Series Specifications

General IconGeneral
Branddynabook
ModelTECRA A40-J Series
CategoryLaptop
LanguageEnglish

Related product manuals