Emptying the Clear bin
TM
Turn power off and unplug before emptying the clear bin
TM
. Failure to do so could
result in electric shock or personal injury.
Do not use the machine without the clear bin
TM
in place.
Cleaning the Clear bin
TM
Do not use detergents, polishes or air fresheners to clean the clear bin
TM
.
Do not immerse the whole cyclone in water.
Ensure clear bin
TM
is completely dry before refitting.
Clean the shroud with a cloth or dry brush to remove the lint and dust.
Washing your filter
Check your filter regularly and wash at least every 6 months according to
instructions to maintain performance.
Turn power off and unplug before washing the filter. Failure to do so could result
in electric shock or personal injury.
The filter may require more frequent washing if vacuuming fine dust.
Do not use detergent to clean filter.
Do not put the filter in the dishwasher, washing machine, clothes dryer, microwave
or near an open flame.
Clearing blockages
Clearing blockages is not covered by your machine's limited warranty.
Turn power off and unplug before checking for blockages. Failure to do so could
result in electric shock or personal injury.
If any part of your machine becomes blocked, it may overheat and then
automatically shut off. Unplug machine and leave to cool down. Clear blockage
before restarting.
Please ensure machine is upright before removing hose or airway inspection ports.
Beware of sharp objects when clearing blockages.
Refit all parts of the machine securely before using it.
SAVE THESE INSTRUCTIONS
THIS APPLIANCE IS INTENDED FOR HOUSEHOLD USE ONLY
To Next Page
Loading...
Need help?
General
