7
Clean the hatch every time the filter
is replaced. Open the small hatch on
the side of the appliance. Use a cotton
bud to clean inside and remove any
debris. This maintains sensor accuracy
and ensures the continuing high
performance of the appliance.
Look for blockages in the small aperture inside the loop
amplifier. Use a soft brush to remove debris.
Ensure the appliance is unplugged.
Dust may accumulate on the surface of
the machine. Wipe dust from the loop
amplifier, filter unit and other parts with a
dry or damp cloth when dust accumulates.
Press buttons to lift off loop amplifier and lift off filter.
Ensure the appliance is unplugged. Look for blockages
in the air inlet holes on the filter. Use a soft brush to
remove debris.
Look for blockages in the air inlet holes under the
filter and use a soft brush to remove debris. Replace
the filter and then the loop amplifier.
Do not use detergents or
polishes to clean the appliance.
Clearing blockages
Cleaning
To Next Page
Loading...
Need help?
General
