Dyson V12 Detect Slim Absolute+ User Manual

Looking after your machine
Look after your battery
Look after your machine
To always get the best performance from your machine, it’s important
to clean it regularly and check for blockages.
To get the best performance and life from your battery, use Eco or Auto/Med mode.
Your machine won’t operate or charge if the ambient temperature is below 5°C(41°F).
This is designed to protect both the motor and battery.
If your machine is dusty, wipe with a damp lint-free cloth.
Check for blockages in the cleaner head, tools and main body of your machine.
Wash your filter regularly and leave to dry completely.
Don’t use detergents or polishes to clean your machine.
For more information and support for your machine go online:
www.dyson.com/support
Your serial numbers
You can find your serial numbers on your machine, battery and charger.
Use your serial number to register.

Dyson V12 Detect Slim Absolute+ Specifications

General

Suction Power	150 AW
Bin Volume	0.35 liters
Run Time	Up to 60 minutes
Weight	2.2 kg
Filtration	Whole-machine filtration
Motor	Dyson Hyperdymium motor
Power Mode	Eco, Auto, Boost
Laser Detection	Yes
Type	Cordless
Cleaner Head	Laser Slim Fluffy cleaner head
Accessories	Combination tool, Crevice tool, Hair screw tool

Summary

Getting Started

Power Modes Explained

Guide to the three power modes: Eco, Auto/Med, and Boost for different cleaning needs.

The LCD Screen

Charging Your Machine

Charging Procedure

Instructions for charging the machine via cable or dock, and LED indicators.

Changing Your Click-in Battery

Removing the Battery

Step-by-step guide to detach the battery from the machine.

Refitting the Battery

Instructions for reattaching the battery securely to the machine.

Emptying Your Bin

Wand Removal and Dirt Release

Steps to remove the wand and empty the dust bin, avoiding trigger press.

Cleaning Your Bin

Bin Removal and Cleaning

Refitting the Bin

Clearing Blockages

Checking Main Body and Wand

Procedure to check and clear blockages in the machine's main body and wand.

Checking Cleaner Head

Inspect the cleaner head for obstructions on the brush bar and air inlet.

Washing Your Filter

Filter Removal and Tapping

Instructions on how to twist off and tap the filter to remove loose dust.

Washing and Rinsing

Drying the Filter

Crucial steps for drying the filter completely for at least 24 hours.

Washing Your Laser Slim Fluffy™ Brush Bar

Brush Bar Removal

Washing and Drying

Brush Bar Replacement

Cleaning Your Tools

Tool Cleaning Procedure

Clearing Blockages from Your Hair Screw Tool

Hair Screw Tool Disassembly

Steps to remove the cover and brush bar to access blockages.

Removing Obstructions

Guide to checking and removing hair or fibres from the brush bar.