32
Technical data
Opening speed
Power consumption
End position setting Electrical
Soft start & Soft stop, photocell
possible, warning light possible
Protection class
Troubleshooting
Error Message Possible Cause Troubleshooting
No response from the garage door opener
1.
2. Plug not inserted.
1.
door opener.
2.
check whether all cables are connected.
-
1.
2.
Automatic closing cannot be set. Photocell not connected.
possible with a connected photocell.
power line.
-
Opener does not work.
instructions.
the photocell function without a connected
photocell.
1.
no obstacle interferes with it.
2. Deactivate the photocell function if no
the instructions.
Garage door does not close. Light on the oper-
the photocell function is activated, but no
photocell is connected.
1.
is not obstructed.
2.
or springs old, weak or defective.
1.
2.
3. Increase the power for automatic reversal.
To Next Page
Loading...
Need help?
General
