１
1. Safety and EMC instructions
Please read carefully the following user manual and the safety instructions
before installing the unit or using the unit!
This manual is designed for the product that the model designation rules as followed:
The description followed in this text is make example with Eaton
1000H(XL)/2000H(XL)/3000H(XL)/6000H(XL)/10000H(XL).
1.1 Installation
★ Condensation may occur if the UPS is moved directly from a cold to a warm environment.
The UPS must be absolutely dry before being installed. Please allow an acclimatization
time of at least two hours.
★ Do not install the UPS near water or in damp environment.
★ Do not install the UPS where it would be exposed to direct sunlight or near heat.
★ Do not block ventilation openings in the UPS’s housing.
★ Do not connect appliances or items of equipment which would overload the UPS (e.g. laser
printers, etc) to the UPS outlet sockets.
★ Place cables in such a way that no one can step on or trip over them.
◇ For 1000H / 2000H / 3000H
★ Socket-outlets and socket of batteries are earthed by the input power cord, please insert the
power cord into mains socket before using of UPS.
★ Connect the UPS only to an earthed shockproof socket outlet.
★ The building wiring socket outlet (shockproof socket outlet) must be easily accessible to
close to the UPS.
★ This is operator installable .
Eaton E Series DX 1000H (X) (XL)
Brand name
UPS series
Output capacity(VA)
Code Batteries internal or external
Nil Standard model with batteries internal
XL
Long backup time model with batteries external
Code
Receptacle and plut type
B
Brazilian type
I
Indian type
... ..
Code
Voltage level
H 220/230/240V
L
110/115/120V
To Next Page
Loading...
Need help?
General
