Eaton 26 Series User Manual

8
Series 26 - Model 26000 Multiple Gear Pump
23 Remove back-up gasket a nd seal from all wear plates.
24 Using a drift punch or similar tool, remove the shaft seal
from the front plate. Caution is needed not to damage counter
bore of shaft seal area when removing seal.
25 Removing the plug in front plate is not necessary, unless
you intend to change rotation. See Reversibility - Changing
Input Rotation of Pump.

Eaton 26 Series Specifications

General

Brand	Eaton
Model	26 Series
Category	Water Pump
Language	English