Certification Standards
Uninterruptible power systems (UPS) directives:
• IEC 62040-1: General and safety requirements for UPS
• IEC 62040-2: Electromagnetic compatibility (EMC) requirements
• IEC 62040-3: Method of specifying the performance and test requirements
• IEC 62040-4: Environmental aspects - Requirements and reporting
CE mark
CE compliance contact: Eaton I.F. – 110 rue Blaise Pascal – 38330 Montbonnot Saint Martin - France
The EC Declaration of Conformity is available upon request for products with a CE mark.
For copies of the EC Declaration of Conformity, contact Eaton Power Quality or check Eaton website:
www.powerquality.eaton.com
Class B emission level CISPR 22 (EN 55022)
Harmonics emission: IEC 61000-3-2
Flickers emission: IEC 61000-3-3
Special Symbols
The following are examples of symbols used on the UPS or accessories to alert you to important
information:
RISK OF ELECTRIC SHOCK - Observe the warning associated with the risk of electric shock symbol.
Important instructions that must always be followed.
Do not discard the UPS or the UPS batteries in the trash.
This product contains sealed lead acid batteries and must be disposed as it's explain in this manual.
For more information, contact your local recycling/reuse or hazardous waste center.
This symbol indicates that you should not discard waste electrical or electronic equipment (WEEE) in the
trash. For proper disposal, contact your local recycling/reuse or hazardous waste center.
Information, advice, help.
To Next Page
Loading...
Need help?
General
