To Next Page

To Previous Page

4.OPERATION

4.1 Display and Buttons

Fig. 4-1 Control Panel

The following tables shows the buttons, LCD indicator and LED indicator

status and description:

Table 4-1 Control Buttons Functions

The Button

Function

Illustration

Turn on

If the UPS is in standby or bypass mode, press >2s,

the buzzer will beep once, then the UPS system will

be turned on.

Turn off

If the UPS is in line, battery, HE or battery test mode,

press >3s, the buzzer will beep once, then the UPS

will be turned off.

Transfer

If the UPS is in fault mode, and the fault cause has

disappeared, press >2s, the buzzer will beep once,

fault will be cleared and UPS will turn to standby

mode.

Function key

Battery test on line mode,Press the button >2s

Mute: Press the button >2s

Down to next page: Press the button<200ms

Eaton 9E15Ki User Manual

Other manuals for Eaton 9E15Ki