To Next Page

To Previous Page

3.3 EBM Connection

When you connect the EBM to the UPS, a small amount of arcs may be produced. This is normal

and will not cause personal injury. Please quickly plug the EBM cable into the EBM port of the UPS.

1. Plug the EBM cable into the battery connection port. A UPS can connect up to 4 EBMs.

2. Confirm the EBM is securely connected and each power cord has an adequate bending radius and

proper tension.

3. Connect the battery module detection cable to the ports of the UPS and EBM.

9PXEBM48RT2U

9PXEBM72RT2U

Eaton 9PX3000IRT3U User Manual

Questions and Answers: