To Next PageTo Next PageTo Previous PageTo Previous Page
Loading...What to do if the Eaton EX 1000 UPS load is no longer supplied if AC power fails?
If your Eaton UPS load is no longer supplied when AC power fails, ensure that the rotary switch on the HotSwap MBP module is set to the Normal position. Also, verify the wiring between the UPS and the HotSwap MBP module.
What to do if Eaton UPS load isn't supplied when the rotary switch is in the Normal position?
If the Eaton UPS load is no longer supplied when the rotary switch on the HotSwap MBP module is in the Normal position, first, try starting the UPS. If that doesn't work, check the wiring between the UPS and the HotSwap MBP module.
General| Noise level | 45 dB |
|---|---|
| Output power | 900 W |
| Input frequency | 40/70 Hz |
| Output power capacity | 1 kVA |
| Input operation voltage (max) | 284 V |
| Input operation voltage (min) | 100 V |
| Output operation voltage (max) | 250 V |
| Output operation voltage (min) | 200 V |
| Power plug | C14 coupler |
| AC outlet types | C13 coupler |
| AC outlets quantity | 6 AC outlet(s) |
| USB 2.0 ports quantity | 1 |
| Safety | IEC/EN 62 040-1, IEC/EN 62 040-2, IEC/EN 62 040-3 (VFI-SS-113), IEC/EN 60 950-1 (RD) |
| Form factor | Tower |
| Product color | Gray |
| LED indicators | Yes |
| Typical backup time at full load | 3 min |
| Typical backup time at half load | 14 min |
| Operating temperature (T-T) | 0 - 40 °C |
Weight and Dimensions| Depth | 440 mm |
|---|---|
| Width | 153 mm |
| Height | 242 mm |
| Weight | 15000 g |
