www.powerware.com/ibm +44 (0) 845 177 3410
33
Powerware 9910-E83
8000 Watt/10000 VA, 220-240 Vac UPS
Features and Benefits
• High power, low profile design ideal for dense i5, p5 or Blades
• System i, System p and Power configurations
• Supports multiple PDUs (1–5 PDUs in a non-redundant power
configuration and 2-10 PDUs in a dual-redundant power
configuration)
• Maximizes 63A input (mains) power connection capacity by providing 8000
watts of output power
• Single SKU supports System i and System p
• Optional interface/communication cards expand control of application
• Tested and approved by IBM to assure out-of-box usability
• Includes premium IBM warranty
E83 Model Guide
Model
Number
IBM
Number
Power Out
(Watts/VA)
Input
Connection
2
Output
Connections
Dimensions
(HxWxD, in/mm)
Unit
Weight
(lb/kg)
3
220-240 Vac; 50/60 Hz auto-sensing
9910-E83
1
44V3923 8000/10000
IEC309 P+N+G
63A
(1) IEC309
P+N+G 63A,
(4) IEC-320-C19
10.5 x 17.2 x 30/
266 x 437 x 762
254/115
Extended Battery Module (EBM)
9910-6646 44V3921 — — —
5.25 x 17.2 x 23.9/
133.5 x 437 x 607
179/81
1. Base configuration for the E83 consists of the E82/E83 Accessory Kit (IBM p/n 44V3919) and four UPS Internal Battery
Trays (IBM p/n 44V3920). 2. Input power cord is 9.9ft/3m. 3. Weight includes batteries.
E83 Battery Runtimes Chart (in Minutes)
Load in Watts
UPS Internal
Batteries
+1 EBM +2 EBMs +3 EBMs +4 EBMs
1000 80 137 189 275 365
2000 31 61 99 138 181
3000 18 38 68 92 121
4000 12 27 52 69 90
5000 9 21 42 55 72
6000 7 17 35 46 60
7000 6 14 31 40 51
8000 5 12 27 35 45
Note: This guide provides typical application information. Battery times are approximate and may vary with equipment,
configuration, disk access, battery age, temperature, etc.
To Next Page
Loading...
Need help?
General