EasyManuals Logo

Echo CS-306 User Manual

Echo CS-306
64 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background image
9
L
ADJUSTMENT, CHAIN TENSION
IMPORTANT
Always loosen guide bar nuts before turning chain
tension adjuster, otherwise clutch cover and
tensioner will be damaged.
1. Remove spark plug lead.
2. Loosen two guide bar nuts (I), if necessary.
3. Hold the bar nose up, and turn the adjuster screw (L)
clockwise until the chain touches the bottom of the
bar.
4. Tighten both guide bar nuts with bar nose held up.
IMPORTANT!
Tighten guide bar nuts to 90 – 110 kgf/cm (80 – 95
in. lbs.) DO NOT over-tighten nuts. Damage to saw
may result.
5. Pull the saw chain around the guide bar by hand.
Reduce chain tension, if you feel tight spots.
6. Keep chain properly tensioned at all times.
NOTE
All chains require frequent adjustments.
FUEL AND L UBRICANT
NOTICE: Use of unmixed, improperly mixed, or fuel older than 90 days, (stale fuel), may cause hard starting, poor
performance, or severe engine damage and void the product warranty. Read and follow instructions in the Storage
section of this manual.
FUEL STATEMENT
WARNING
Alternative fuels, such as E-20 (20% ethanol), E-85 (85% ethanol) or any fuels not meeting ECHO requirements are
NOT approved for use in ECHO 2-stroke gasoline engines. Use of alternative fuels may cause performance
problems, loss of power, overheating, fuel vapor lock, and unintended machine operation, including, but not limited
to, improper clutch engagement. Alternative fuels may also cause premature deterioration of fuel lines, gaskets,
carburetors and other engine components.
GASOLINE - Use 89 Octane [R+M/2] (mid grade or higher) gasoline or gasohol known to be good quality. Gasohol
may contain up to 10% Ethyl (grain) alcohol or 15% MTBE (methyl tertiary-butyl ether). Gasohol containing methyl
(wood) alcohol is NOT approved.
Two Stroke Oil - A two-stroke engine oil meeting ISO-L-EGD (ISO/CD 13738) and J.A.S.O. FC Standards must be
used. Echo brand premium Power Blend
TM
Universal 2-Stroke Oil meets these standards. Engine problems due to
inadequate lubrication caused by failure to use an ISO-L-EGD and J.A.S.O. FC certified oil, such as Echo premium
Power Blend
TM
, will void the two-stroke engine warranty.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Echo CS-306 and is the answer not in the manual?

Echo CS-306 Specifications

General IconGeneral
Engine Displacement30.1 cc
Engine Type2-Stroke
Bar Length14 in
Chain Pitch3/8 in
Chain Gauge0.050 in
Fuel Capacity0.4 L
Fuel Tank Capacity0.4 L
Bar Length (Alternative)12 in

Related product manuals