GRASS TRIMMER
OPERATOR'S MANUAL
9
____ - Trimmer Assembly:
____ - Power Head
____ - Drive Shaft Assembly
____ - Plastic Bag (Co-Pack)
____ - Operator's Manual
____ - Safety Manual
____ - Warranty Card & Limited Warranty
____ - Locking Tool, P/N 89751801131 (head locking tool)
____ - Safety Glasses
____ - Echo Power Blend
TM
2-stroke oil sample
____ - 12 pcs. 8 in. x .080 Pre-cut Nylon Line
*__ - Rapid Loader
TM
2-line Head
*__ - Shield Assembly
*__ - Line Head Mounting Hardware:
* ___ - 3/8-24 Locknut
* ___ - Small Washer
* ___ - Large Washer
* ___ - Locking Tool, P/N 89751801131 (wrench handle)
* ___ - Wrench 17 x 14.5, P/N X602000031
CONTENTS
The ECHO product you purchased has been partially assembled for your convenience. Due to packaging restrictions,
installation of the plastic debris shield, nylon line head, and positioning of the front handle are necessary.
After opening the carton, check for damage. Immediately notify your retailer or ECHO Dealer of damaged or missing
parts. Use the contents list to check for missing parts.
* Some units may be factory pre-assembled. No assembly tools are needed and the nylon line head, plastic debris shield,
and mounting hardware, shown in the contents list, are pre-assembled to the unit. Only the front handle may need to be
re-positioned for comfortable operation.
*
To Next Page
Loading...
Need help?
General