7
1
2
3
4
5
6
8
12
11
16
15
13
14
18
9
10
1. Operator’s manual - Included with unit. Read
before operation and keep for future reference to
learn proper, safe operating techniques.
2. Spark plug
3. Carburettor - Device for mixing fuel and air in the
correct proportions.
4. Silencer cover - Cover for the silencer to prevent
operator contact with hot exhaust.
5. Starter handle - Pull handle to start the engine.
(“ES” START)
6. Ignition switch - Device for allowing the engine to
be started and stopped.
7. Brake lever - Brake to be used when starting the
engine for enhanced safety.
8. Throttle trigger - Device activated by the
operator’s finger, for controlling the engine speed.
9. Throttle trigger lockout - Device that prevents the
accidental operation of the throttle trigger until
manually released.
DESCRIPTION
10. Fuel tank cap - For closing the fuel tank.
11. Fuel tank - Contains fuel and fuel filter.
12. Air cleaner cover - Covers air filter.
13. Gear housing - Housing to support the gears that
reduce the speed of engine to cutting attachment.
14. Guard - Guard between the front handle and
cutting device for protecting the hand from injuries
if the hand slips off the handle.
15. Front handle - Handle located on the cutting
device.
16. Leaf collector plate - Keeps cut leaves or twigs
from scattering.
17. Cutting device - That part of the assembly of
cutter blade and shear plate together with any
supporting part, which performs the cutting action.
18. Blade cover - Cover for blade used when unit is
being transported.
19. Double sided blade
20. Safety decal - Part number X505-002030
17
HC-30ESW
HC-30ES
18
19
20
7
To Next Page
Loading...
Need help?
General