EasyManuals Logo
Home>Echo>Trimmer>HCA-2620

Echo HCA-2620 User Manual

Echo HCA-2620
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #29 background imageLoading...
Page #29 background image
HCA-2620 MAINTENANCE
X7502342200 29
© 5/2017 ECHO Inc.
ENGLISH
Note: Federal EPA regulations require all model year 2012 and later
gasoline powered engines produced for sale in the United
States to be equipped with a special low permeation fuel
supply hose between the carburetor and fuel tank. When
servicing model year 2012 and later equipment, only fuel
supply hoses certified by EPA can be used to replace the
original equipment supply hose. Fines up to $37,500 may be
enforced for using an un-certified replacement part.
Spark Plug
Level 2.
Use only NGK CMR7H spark plug otherwise severe engine damage
may occur.
1. Remove spark plug and check
for fouling, worn and rounded
center electrode.
2. Clean the plug or replace with a
new one. DO NOT sand blast to
clean. Remaining sand will
damage engine.
3. Adjust spark plug gap by
bending outer electrode.
4. Tighten spark plug to 102-153
kgf•cm (89-133 in•lbf).
Cooling System
Level 2.
Parts Required: Tune Up Kit.
Parts Required: None if you are careful.
0.65 mm (0.026 in.)

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Echo HCA-2620 and is the answer not in the manual?

Echo HCA-2620 Specifications

General IconGeneral
BrandEcho
ModelHCA-2620
CategoryTrimmer
LanguageEnglish

Related product manuals