G
RASS
T
RIMMER
/B
RUSH
C
UTTER
O
PERATOR
'
S
M
ANUAL
17
PRE - OPERATION
OPERATION
WITH BLADES
Preparing the Trimmer/Brush Cutter for Blade Use
WARNING DANGER
Blade use DEMANDS specific Brush Cutter configuration. Operation without specified shield and harness can result
in serious personal injury. Follow installation instructions included in optional kits.
Plastic and Nylon Blades Require "Blade Conversion Kit," P/N 99922200410
(metal shield [A] and shoulder harness [B]).
Steel/Metal Blades Require:
SRM-2100SB "Combination Blade" and "U-Handle Kit" P/N 99944200451.
SRM-2400SB "Combination Blade" and "U-Handle Kit" P/N 99944200521.
WARNING DANGER
The type of Blade used MUST be matched to the type and size of material cut. An improper or dull blade can cause
serious personal injury. Blades MUST be sharp. Dull blades increase the chance of kick out and injury to yourself
and bystanders.
Choosing the Correct Blade
Plastic/Nylon Blades may be used where ever the nylon line head
is used. DO NOT use this blade for heavy weeds or brush!
C
A
B
To Next Page
Loading...
Need help?
General