Echo SRM-210SB User Manual

GRASS TRIMMER/BRUSH CUTTER
OPERATOR'S MANUAL
23
3. Use the brush to remove dirt form cylinder fins.
IMPORTANT
Do not use a metal scraper to remove dirt from the cylinder fins.
4. Remove grass and leaves from the grid between the recoil starter and
fuel tank.
5. Assemble components in reverse order.
EXHAUST SYSTEM
Spark Arrestor Screen
Level 2.
Tools required: Cross head screwdriver, 3 mm hex wrench, soft
metal brush
Parts Required: Screen P/N 14586240630, Gasket P/N 14586642031
1. Remove spark plug lead from spark pulg.
2. Remove engine cover. See “Cooling System Cleaning” for step by
step instructions.
3. Place piston at Top Dead Center (TDC) to prevent carbon/dirt from
entering cylinder.
4. Remove spark arrestor screen cover (A), gasket (B), and screen (C)
from muffler body.
5. Clean carbon deposits from muffler components.
6. Replace screen if it is cracked, plugged or has holes burned through.
7. Assemble components in reverse order
B
A
C

Echo SRM-210SB Specifications

General

Brand	Echo
Model	SRM-210SB
Category	Trimmer
Language	English