22
SRM-22GES
SRM-22GES
Mass :
unit without cutting attachment, empty tank kg 4.63
unit with specified cutting attachment, empty tank kg 4.84
unit with specified cutting attachment, full tank kg 5.17
Volume :
fuel tank L 0.44
Cutting attachment :
nylon line head G138
line diameter mm 3.0
line length m 2 × 1 line
thread Left-handed M10 × 1.25
Gear ratio :
gear ratio and lubrication 1.4 reduction and good quality lithium grease
Rotational direction of output shaft seen
from above : Anticlockwise
External dimensions :
length mm 1,785
width mm 210
height mm 360
Engine :
type Air cooled two stroke single cylinder
engine displacement mL(cm
3
) 21.2
maximum shaft brake power, measured in
accordance with ISO 8893 kW 0.67
engine speed at maximum engine power r/min 6,500
recommended maximum engine speed r/min 8,400
output shaft speed r/min -
recommended engine idling speed r/min 3,000
engine speed at beginning of clutch engagement r/min 3,900
carburettor Diaphragm type
ignition Flywheel magneto - CDI system
spark plug NGK BPMR7A
starter Recoil starter (“ES” START)
clutch Automatic centrifugal clutch
Fuel : Regular grade petrol. Minimum 89 Octane unleaded
petrol is recommended. Do not use fuel containing
methyl alcohol or more than 10 % of ethyl alcohol.
oil Two stroke, air-cooled engine oil. 50 : 1 for ISO-L-
EGD Standard (ISO/CD 13738), JASO FC grade
and ECHO Premium 50 : 1 oil.
ratio 50 : 1 (2 %)
fuel consumption at maximum engine power L/h 0.62
specified fuel consumption at maximum
engine power g/(kW•h) 685
Sound pressure level : (ISO 22868) LpAav= dB(A) 94.2
Sound power level : (ISO 22868) LwAav= dB(A) 101
Vibration levels : (ISO 22867)
idling m/s
2
4.0
racing m/s
2
7.5
SPECIFICATIONS
Specifications, descriptions and illustrative material in this
literature are as accurate as known at the time of publication,
but are subject to change without notice.
Illustrations may include optional equipment and
accessories, and may not include all standard equipment.
To Next Page
Loading...
Need help?
General