Master Power Switch
Marine FX speakers have a
separate Master Power Switch
and a Standby Button. The
switch MUST be set to the ON
position to power your Marine
FX speakers. Once the switch
is set to ON, use the Standby
Button located on the top
panel to turn the unit On/Off.
NOTE: When not in use for
extended periods, turn the
Master Power off to preserve
battery life.
IMPORTANT: Standby Power
function will NOT operate
when the Master Power is set
to OFF.
Connections: Functions
Audio AUX-IN
Connect an audio device
using the 3.5mm cable
connection as an alternative
to a Bluetooth connection to
your Marine FX speakers.
NOTE: Volume level must
be controlled from the audio
device when connected to the
AUX-IN connection.
Input
Connect the USB cable to the
USB-C Input to charge
your Marine FX speakers.
RECOMMENDATION: Use the
USB cable and power adapter
included in the box.
NOTE: Charge time from low
to full charge is approximately
6 hours.
Your speakers can be charged
while playing audio.
CAUTION: Do NOT charge if
unit and/or connections are
wet or damp.
To Next Page
Loading...
Need help?
General