40
Using BIOS
Wake up by USB KB/Mouse (Enabled)
This item enables or disables you to allow keyboard or mouse activity to awaken the
system from power saving mode.
Power on by Onboard LAN (Enabled)
This item defines how the system will act after AC power loss during system operation.
When you set Off, it will keep the system in Off state until the power button is
pressed.
Restore On AC Power Loss (Off)
Power on by Modem Ring (Disabled)
This system can be turned off with a software commend. If you enable this item, the
system can automatically resume if there is an incoming call on the Modem. You
must use an ATX power supply in order to use this feature.
Enabled or Disabled Wake up System by Onboard LAN.
To Next Page
Loading...
Need help?
General
