To Next Page

To Previous Page

Using BIOS

CPU L1&L2 Cache (Enabled)

All processors that can be installed in this mainboard use internal level 1 (L1) and external

level 2 (L2) cache memory to improve performance. Leave this item at the default value

for better performance.

CPU L3 Cache (Enabled)

This item is only available when processors support L3. Some high-end processors support

L3. If the CPU do support L3, you may set this item to enable or disable. Leave this item

at the default value for better performance.

Hyper-Threading Technology (Enabled)

This item is only available when the chipset supports Hyper-Threading and you are using a

Hyper-Threading CPU.

Quick Power On Self Test (Enabled)

Enable this item to shorten the power on testing (POST) and have your system start up

faster. You might like to enable this item after you are confident that your system hardware

is operating smoothly.

First/Second/Third Boot Device (Removable/Hard Disk/CDROM)

Use these three items to select the priority and order of the devices that your system

searches for an operating system at start-up time.

Network Boot Priority (Press Enter)

Scroll to this item and press <Enter> to view the following screen:



1. Network 0 :

2. Network 1:

3. Network 2:

4. Network 3:

Phoenix-AwardBIOS CMOS Setup Utility

Network Boot Priority

Item Help



Menu Level

Use < > or < > to

select a device, then

press <+> to move it

up, or <-> to move it

down the list. Press

<ESC> to exit this

menu.







F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults

: Move PU/PD/+/-:Change Priority F10:Save ESC:Exit

Press <Esc> to return to the Advanced BIOS Features page.

The First boot device “CD-ROM”

item is for SATA1 or SATA3/5/6 port (Provide by ICH8, black SATA connector) used

ROM in SATA7 or PATA CD-ROM in IDEJ1 port that provide from J-Micron JMB361

(Red SATA connector is SATA7), please choose “CD-ROM name” from first boot

device list in Advance BIOS Features -> First boot device

if you install SATA CD-ROM in one of SATA1/3/5/6 port. If you installed SATA CD-

Questions and Answers:

Need help?

Do you have a question about the ECS P965T-A and is the answer not in the manual?

ECS P965T-A Specifications

General

Number of memory slots	4
Maximum internal memory	8 GB
Processor socket	LGA 775 (Socket T)
Processor manufacturer	Intel
USB 2.0 connectors	3
Power fan connector	Yes
Number of SATA connectors	5
Number of Parallel ATA connectors	0
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Parallel ports quantity	1
Audio chip	Realtek ALC883
Certification	WHQL
Audio output channels	7.1 channels
Motherboard form factor	ATX
Compatible operating systems	-
On-board graphics card	No
Parallel processing technology support	Not supported
PCI Express x16 slots	2
Networking features	Gigabit Ethernet
BIOS type	Award
BIOS memory size	32 Mbit