45
Using BIOS
Frequency/Voltage Control
This item enables you to set the clock speed and system bus for your system. The clock
speed and system bus are determined by the kind of processor you have installed in your
system.
Phoenix-AwardBIOS CMOS Setup Utility
Frequency/Voltage Control
Item Help
Menu Level
CPU Clock Ratio [16X]
DIMM Voltage Control [Default]
NB Voltage Control [Default]
CPU Voltage Control [Default]
Auto Detect PCI Clk [Enabled]
Spread Spectrum [Enabled]
Host/SRC/PCI Clock [Default]
DIMM/NB/CPU Voltage Control (Default)
Use this item to enable the DIMM/NB/CPU voltage control function.
Auto Detect PCI Clk (Enabled)
When this item is enabled, BIOS will disable the clock signal of free DIMM and PCI slots.
Spread Spectrum (Disabled)
If you enable spread spectrum, it can significantly reduce the EMI (Electro-Magnetic
Interference) generated by the system.
Host/SRC/PCI Clock (Default)
This item allows you to adjust the SRC/PCI Clock clock. You can key-in the numbers within
the range to make a precise and ideal adjustment.
CPU Clock Ratio (16X)
Enables you to set the CPU clock. The CPU clock ratio times the CPU Host/PCI Clock
should equal the core speed of the installed processor.
Example: CPU Clock Ratio 16
CPU Frequency x 200
Installed CPU Clock Speed 3200MHz
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
Press <Esc> to return to the Main menu setup page.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
